Menu

Dear Customers, 

Abrites is extremely happy to announce its latest special function which allows the user to perform mileage recalibration on the following VAG vehicles completely by OBDII.

- Audi A6/A7 (4G)
- Audi A8 (4H)
- VW Touareg (7P)

This functionality will be under the VN010 special function. Please also note the introduction of the VAG Mileage Recalibration package which will consist of VN001, VN007 and VN010 and will contain a 10% discount compared to purchasing the functions separately. 

We thank you for keeping your faith in us as we continue to achieve the impossible!

 

In the upcoming version of the Abrites Diagnsotics for Kia/ Hyundai version 3.1 you can expect the following new freatures:

PIN code reading for vehicles with Delphi DCM3.7 ECUs 
PIN code reading for vehicles with Smart Keys (2015+; limited models supported by now)

In the upcoming update for the Abrites Diagnostics for Nissan 31.5, you witness the following changes. 

- Brand new cloud- based diagnostics user interface
- Easy vehicle recognition by image
- Auto- detection by VIN when possible
- Supports full vehicle scan, module identification, read/clear DTC, live data, actuator tests and various procedures

In the upcoming version of the Abrites diagnostics for Renault 31.5 you can expect the following new freatures:

- Autoliv Airbag Clear Crash for Talisman, Megane IV, Scenic IV, Espace V, Kadjar
- Virgin Engine Control Module (ECM) adaptation for Clio IV, Twingo III, Trafic III, Logan II, Sandero II, Duster Ph2, Dokker, Lodgy
- PIN reading speed improved on poor interent connection
- Clio IV, Logan II, Sandero II, Dokker, Lodgy, Duster Ph2 2015+ PIN reading support improved
- General diagnostic improvements - identification of UDS vehicles improved, livedata items order fixed
- Recovering of Smart453 possible with RR015 licence

In the upcoming version of the Abrites diagnsotics for VAG you can expect the following new freatures:

- Reworked the procedure for adaptation of EZS-Kessy from A6 (2005-2010) and Q7 (2006-2014).
- Reworked the procedure for adaptation of Transmission of A6 (2005-2010) and Q7 (2006-2014).
- Reworked the procedure for adaptaiton of Immo V ECU for the BCM2 cars (now it is possible to adapt the ECU completely by OBDII for the ECUs until 2013, for the other ECUs it is no longer necessary to write the flash back to the ECU).
- Reworked the procedure for adaptation Immo III/Immo IV ECU/TCU (VN005). Adapting the devices without using EM003 emulator.
- ME17.5.24 is now supported - PIN/CS is read from the internal CAN bus

In the upcoming version of the Abrites diagnositcs for Opel/ Vauxhall version 7.3 we will proudly introduce the reading of the Security Code:

- Insignia B - Instrument Panel Cluster (IPC) - 4.2 inch Color Display [ Free for all the customers who currently have the ON013 special function]

                                       рр

In the upcoming update we are most excited to announce the latest addition to the Abrites diagnsotic software - the Abrites diagnostics for Rolls- Royce will be released with this update. For the moment the Abrites diagnostics for Rolls Royce will support reading of modules, identification and module recognition as well as diagnostic trouble codes (DTC), live data viewing, recording and saving as well as actuator testing. The Abrites Diagnostics for Rolls Royce is based on the Abrites Diagnostics for BMW/ Mini just like the Rolls Royce models. We are very happy to begin working with the ultimate luxury brand and will continue our development in the future.

The Abrites ABPROG EWS3 Reader is an assistance tool designed to allow you to read the EWS3 Dump from the EWS3 cars in order to make a key for them, this tool will be very useful when working on the BMW E46/ E53 model cars. The tool attaches to the ABPROG programmer which attaches to the AVDI interface in order to read the EWS3 dump.

Once you have read the EWS3's dump you will be able to save it on your computer. After you do that you will be able to load this dump in the PROTAG software and program a key using it. With the help of the EWS3 Adapter you will no longer need to use third party EWS3 Programmers to read the EWS dump.

As is the norm the Abrites EWS3 adapter comes with the Abrites warranty and the guarantee of our highest quality standards.

*The kit includes an external power supply for the adapter.

IMG 1753

ABPROG1

IMG 1743

Some of the biggest news we have for you is the next big step in the Abrites diagnostics for Mercedes-Benz. 

Major updates will be available with the next update to the Abrites Diagnostics for Mercedes. 

- With the upcoming version we will be able to provide SCN and Variant coding for the MED40, MED177, VGSNAGx ECUs allowing for coding of features such as the speed restrictor for the S63 ///AMG models which will assist Mercedes specialists immencely.

- New flashing capabilities available for many electronic control units (More details at a later stage before the update).

- Renew of FBS4 control modules including 7G Tronic units 722.9. ALL BY OBD or internal CANBUS.

- Renew of FBS4 CRD 3.X Engine Control Units. ALL BY OBD or internal CANBUS.

- Displaying status of FBS4 components in the vehicle.

With the above mentioned update our customers will have the accumulation of all currently available Mercedes tools in one at less than half the price thus making AVDI and Abrites diagnostics for Mercedes the ultimate Mercedes-Benz tool.

In the next update to the Abrites diagnostics for Toyota/ Lexus/ Scion we will be able to add the Camry and Prius 2017+ models for smart system reset and key programming. 

Please check back with the news section for additional news about this.